POLARIS

***NOW AVAILABLE**

*Coated in our Platinum Light Ceramic*

HPS through extensive field and dyno testing has developed an all new exhaust silencer for the POLARIS BOOST. Compatible with the stock ECM programming with an impressive -7.5 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.

HPS is conscientious of maintaining respectable sound levels. This new PATRIOT Boost silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven our designs with supplying two decades of lightweight and durable snowmobile silencers.

Features: 

•  Double Walled for sound quality and vibration reduction
• (-7.5 lbs weight reduction from stock)
• +4 HP increase in the mid range and +2 at peak RPM
• Dyno tuned and field tested for best performance and durability
• Ceramic Coating rated at 2000 degrees
• Webbed mounting brackets for maximum strength and weight reduction
• Baffled Multi-chambered Core
• HPS Quality and Sound

INSTALL VIDEO

Fits:
2022-24 Polaris Boost Sleds

NOTE: Does not fit or work on Polaris AXYS 600/800 or 850 NA Sleds.
All results are tested at complete break-in and stock parameters
(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
Recommended peak engine setting 8200 RPM

**NOW AVAILABLE **

Keep your tools and gear warm and protected with the HPS Under-the-hood Storage bag for the Polaris Boost sled. Utilizing the unused void above the oil tank, this is perfect for keeping a spare set of gloves and goggles warm. 

Features:
-Light weight, powder coated, aluminum bracket 
-Durable, heat and water resistant storage bag with multiple storage compartments
-Helps hold the oil tank from shaking and vibrating when riding
-Bracket and bag weighs just over 1.5lbs

***NOW AVAILABLE***

(DICOUNTED 9R/850 MUFFLERS ARE DUE TO SCRATCH AND DENT REASONS or MINOR MANUFACTURING DEFECTS. THEY ARE NOT AFFECTED IN FIT or PERFORMANCE AND WILL WORK AS NORMALLY EXPECTED) 

This batch of mufflers does not have any damage or performance defects. This batch was originally made with the wrong spring hook placement where the mufflers attach to the pipe. Instead of cutting off the wrong spring hooks they were left on and the right ones were placed on them. These mufflers will come with an extra set of unused spring hooks on the inlet of the mufflers (See pictures).

These mufflers can be used on:

INSTALL VIDEO

***NOW AVAILABLE***

Now available in our Platinum Lite Ceramic with Ceramic Logo

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Recommended peak engine setting 8150 RPM

INSTALL VIDEO

***NOW AVAILABLE***

Storage on the Ski-Doo Gen4 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood.  Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together. 

FEATURES

• Very durable and heat resistant insulated fabric
• Durable soft-touch internal fabric
• Heavy duty water resistant zippers
• Bag handle can be unwound for ten feet of emergency paracord 
• Handle can also be used for an emergency wristband with whistle
• Multiple storage compartments for multiple uses

**Now available in our New High Performance Platinum Lite Ceramic**

The Polaris Pro has been a very successful sled proving itself on being one of the lightest most nimble chassis ever made. HPS has made the Pro even better by making it even more lighter, stronger and increasing throttle response. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Fits:
Pro RMK 800 2011-15
Assault 800 2011-15
Switchbacks 800 2011-14
Rush 800 2012-14
Indy 800 2014-15
&
*2016 Pro chassis only, will not fit the AXYS chassis*

Recommended peak engine setting: 8000-8050 RPM

NOTE: All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will Not fit the IQR Chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will not fit the IQR chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will not fit the IQR chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will not fit IQR chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Would you like to build your own exhaust muffler for your Non-Turbo Polaris Snowmobile?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the exit side of the stock pipe and foil gasket.

Features:
- Fits all 2011+ 850, 800, 650, 600, PRO Chassis, AXYS Chassis, Matryx Chassis, Non-Turbo sleds.
- 2" OD tubing cut at a total length of 1.5"
- Perfect Fit

For bulk orders and pricing, please contact us.