All Exhausts Parts

***19-22 IN-STOCK READY TO SHIP***

COATED WITH OUR PLATINUM CERAMIC

The all new Gen-4 850 is the most powerful and effortless sled Ski-Doo has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.

Features:

• 2017-2022 Gen 4 850 E-TEC / MXZ / Renegade /Summit/Freeride
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Platinum Lite Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

***CURRENTLY BACK IN STOCK***

Everyone enjoys a warm meal while out on a cold snowmobile ride, but finding a place to mount a cooker pot on you Factory Gen4 Turbo is almost impossible. HPS has created a bracket specifically for securely mounting a Trail Chef Muff Pot Cooker onto your Ski-Doo Factory 850 Turbo which will work perfect for not only a stock set up, but also works with the HPS any other aftermarket muffler set up you choose to ride. Strategically placed to keep your food the warmest and most accessible.

Mounts directly to the exhaust manifold Flange by way of stainless HPS bracket for best heat transfer. 

(Some minor modification/trimming may be necessary on the outer heat shield of the stock downpipe manifold)

12" Ski-DOO/LYNX EGT extended loom for the 2019-2024 Gen-4 and Gen-5 Snowmobiles.

PLEASE NOTE: 

• May not fit Gen4/5 Enduro Wide body Sled plugs 
• May not fit 2017-18 gen4 850
• (Does not include EGT PROB)

*** IN-STOCK READY TO SHIP***

The HPS exhaust for the Ski-Doo Gen4 850 Turbo is the perfect combination of performance, durability, light weight, and sound quality. This is the only performance muffler designed for the Factory Turbo with an aftermarket down pipe manifold made to utilize space and allow room for the HPS heat storage bracket and bag (available here).  Recreated from the ground up with our unique double walled, dual chamber design that gives the customer the durability and that deep HPS Signature tone that our customers love. 

FEATURES 

• Light weight ceramic coated performance muffler & downpipe manifold
• -9.4 lbs lighter than stock
• +2 HP gain with a stronger and broader top end
• Quite deep tone 
• includes 12" EGT wire loom extension for stock temperature prob

Optional Trail Chef Muff Pot now available.

Optional storage bag now available 

***CURRENTLY AVAILABLE ***

Running the stock heat shield shells are required.

The HPS exhaust for the Ski-Doo G5 850 Turbo is the perfect combination of performance, durability, light weight, and sound quality. This is the only performance muffler designed for the Factory Turbo with an aftermarket down pipe manifold made to utilize space and allow room for the HPS heat storage bracket and bag.

FEATURES 

• Light weight ceramic coated performance muffler & downpipe manifold
• -9.4 lbs lighter than stock
• +2 HP gain with a stronger and broader top end
• Quite deep tone 
• includes 12" EGT wire loom extension for stock temperature probe

Thank you for your support.

***NOW AVAILABLE***

Now available in our Platinum Lite Ceramic with Ceramic Logo

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Recommended peak engine setting 8150 RPM

INSTALL VIDEO

PRODUCT DESCRIPTION

***Expect about 2 Weeks Processing Time***

The NEW HPS Performance Insert/spark arrestor is the easiest and most affordable performance you can add to your Yamaha YXZ1000R Side x Side. Constructed with a 100% forest approved non-corrosive, high quality 304L Stainless Steel spark arrestor screen allowing you to not only add over +4 HP to your machine but keep you completely responsible and legal as you continue to enjoy your favorite recreational areas. With 60% more flow through your stock exhaust and more performance sound there is no need to buy loud slip-ons or expensive full exhaust systems.

NOTE: Plugging the exhaust smog vents on engine valve cover is recommended/necessary when doing any performance mods to the YXZ.

Features:
-Dyno tested and proven.
-Minimal increase in sound levels for a quiet system.
-All stainless steel construction.
-Oversize outlet.
-100% forest approved.
-Very affordable and easy to install.

Product Videos

***CURRENTLY AVAILABLE ***

Product Videos

**NOW AVAILABLE**

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing over 13 lbs and increasing power +2.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the; Alpha One, M6000 and M8000 ProClimb, SnoPro 600/800, XF 600/800, ZR 600/800, 2018-22, Riot/Riot X models.
• DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Video

***NOW AVAILABLE***

**Available in the Platinum Lite Ceramic with Ceramic Logo**

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing weight to only 6.5 lbs and increasing power +2.5 HP. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the; Alpha One, M6000 and M8000 ProClimb, SnoPro 600/800, XF 600/800, ZR 600/800, 2018-22, RIOT/RIOT X, models. 

• DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler 

• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. 

• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.

• The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.

• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

INSTALL VIDEO

***NOW AVAILABLE***

(DICOUNTED 9R/850 MUFFLERS ARE DUE TO SCRATCH AND DENT REASONS or MINOR MANUFACTURING DEFECTS. THEY ARE NOT AFFECTED IN FIT or PERFORMANCE AND WILL WORK AS NORMALLY EXPECTED) 

This batch of mufflers does not have any damage or performance defects. This batch was originally made with the wrong spring hook placement where the mufflers attach to the pipe. Instead of cutting off the wrong spring hooks they were left on and the right ones were placed on them. These mufflers will come with an extra set of unused spring hooks on the inlet of the mufflers (See pictures).

These mufflers can be used on:

INSTALL VIDEO

**NOW AVAILABLE**

The Ski-Doo E-Tec motor is a catalyst of power and clean running engines. Put more power to your Ski-Doo E-Tec combined with the deep signature sound of our HPS silencer. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

Features

• 12.5 LBS weight loss from stock
• +3.5 HP above stock
• Recommended peak engine setting 7900-8000 RPM
  
• D shape Bung for EGT prob and Stock lock washer

Fits:
E-Tec XM 800 2017 Models
E-Tec XM 800 2012-16
E-Tec XP 800 2011-12
E-Tec T3
E-Tec Renegade
E-Tec Freeride
E-Tec 600 2012-2017
*does not fit Gen-4 850 Chassis

NOTE: All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

**Now available in our New High Performance Platinum Lite Ceramic**

The Polaris Pro has been a very successful sled proving itself on being one of the lightest most nimble chassis ever made. HPS has made the Pro even better by making it even more lighter, stronger and increasing throttle response. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Fits:
Pro RMK 800 2011-15
Assault 800 2011-15
Switchbacks 800 2011-14
Rush 800 2012-14
Indy 800 2014-15
&
*2016 Pro chassis only, will not fit the AXYS chassis*

Recommended peak engine setting: 8000-8050 RPM

NOTE: All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

***NOW AVAILABLE**

*Coated in our Platinum Light Ceramic*

HPS through extensive field and dyno testing has developed an all new exhaust silencer for the POLARIS BOOST. Compatible with the stock ECM programming with an impressive -7.5 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.

HPS is conscientious of maintaining respectable sound levels. This new PATRIOT Boost silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven our designs with supplying two decades of lightweight and durable snowmobile silencers.

Features: 

•  Double Walled for sound quality and vibration reduction
• (-7.5 lbs weight reduction from stock)
• +4 HP increase in the mid range and +2 at peak RPM
• Dyno tuned and field tested for best performance and durability
• Ceramic Coating rated at 2000 degrees
• Webbed mounting brackets for maximum strength and weight reduction
• Baffled Multi-chambered Core
• HPS Quality and Sound

INSTALL VIDEO

Fits:
2022-24 Polaris Boost Sleds

NOTE: Does not fit or work on Polaris AXYS 600/800 or 850 NA Sleds.
All results are tested at complete break-in and stock parameters
(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
Recommended peak engine setting 8200 RPM

***NOW AVAILABLE***

Using the super versatile Ascender chassis the blast is the best introduction to extreme backcountry riding. Where lightweight and power for aggressive riding, the HPS exhaust is the only way to go for shedding weight and having optimal performance. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• -13lbs lighter than stock
• Fits all the; Arctic Cat Blast 400 sleds
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

*** NOW AVAILABLE ***

COATED WITH OUR PLATINUM CERAMIC

The all new Gen-4 600R is the most powerful and effortless sled 600 has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The Platinum Ceramic is a rich metallic finish rated for 22000 degrees.

Features:

• 2019-23 Gen-4 600R
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +4 HP increase in the mid range (7200 RPM) and +2 HP on the top end (8000 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Burnt Gold Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE:

All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

https://youtu.be/3v3JR_GUqnc

https://youtu.be/1jjvGNO0rSA

https://youtu.be/SiOdRP7TAvI

***IN-STOCK READY TO SHIP***

COATED WITH OUR PLATINUM CERAMIC

The all new Lynx 850 is the most powerful and effortless sled Lynx has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.

Features:

• FITS: LYNX 850 Boondocker and Sports models
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Platinum Lite Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

***NOW AVAILABLE***

Available in our Exclusive Platinum Ceramic Coating with Black HPS Logo

Making the best performance exhaust for the new Catalyst snowmobile was no easy task. The Catalyst is one of the most nimble and exciting sleds in the industry. With the HPS Performance Exhaust you will make Catalyst even more fun; sharpening performance and throttle response, shaving over 12 lbs from the massive stock muffler, and having the best sound exhaust in the industry while staying respectable with sound levels. 

 Features
- 6 lbs. (Over 12 lbs weight savings over stock)
- Better throttle response 
- Perfect fit and easy to install 
- HPS Signature Tone

Need a V-band flange for a down-pipe DIY (Do It Yourself) project? This V-band flange is a perfect fit on any Can-am X3 stock turbo to 2.5" exhaust tubing.

Features:
- Stainless Construction
- Fits Perfect to any stock X3 Turbo
- Necked down to fit any 2.5" OD exhaust tube

***Now Available in the NEW Burnt Gold & Platinum Lite Ceramic with Ceramic Logo***

Using the super versatile Ascender chassis the blast is the best introduction to extreme backcountry riding. Where lightweight and power for aggressive riding, the HPS exhaust is the only way to go for shedding weight and having optimal performance. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• -11 lbs lighter than stock
• Suppressor is trail rated sound levels
• Fits all the; Arctic Cat Blast 400 sleds
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will not fit the IQR chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Would you like to build your own exhaust muffler for your Polaris RZR?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the stock RZR 1000 (NON-TURBO) down-pipe manifold and foil gasket.

Features:
- Fits 2014+ RZR 1000, RZR 1000 4, RZR XP, RZR XP 4, RZR RS1, Non-Turbo stock down-pipe exhaust manifolds and foil gaskets.
- 2.5" OD tubing Cut at a total length of 1.5".
- Perfect Fit

For bulk orders and pricing, please contact us.

***NOW AVAILABLE***

Using the super versatile Ascender chassis the blast is the best introduction to extreme backcountry riding. Where lightweight and power for aggressive riding, the HPS exhaust is the only way to go for shedding weight and having optimal performance. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• -13lbs lighter than stock
• Fits all the; YAMAHA VENOM 400 sleds
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

INSTALL VIDEO

***Now Available in the NEW Burnt Gold & Platinum Lite Ceramic with Ceramic Logo***

Using the super versatile Ascender chassis the blast is the best introduction to extreme backcountry riding. Where lightweight and power for aggressive riding, the HPS exhaust is the only way to go for shedding weight and having optimal performance. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• -11 lbs lighter than stock
• Suppressor is trail rated sound levels
• Fits all the; YAMAHA VENOM 400 sleds
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

INSTALL VIDEO

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will not fit IQR chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will Not fit the IQR Chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

***NOW AVAILABLE***

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing over 13 lbs and increasing power +2.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the; 2020-2021 Yamaha Mountain Max 800 Sleds
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Video
 

Using our proven dual chamber technology this silencer is the perfect way to add additional points to your IQ. With this silencer HPS gives additional power throughout the curve with an added +3.5 HP on the top-end with a weight-loss of -10.5 LBS. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: All results are tested with stock parameters with HPS muffler.

• Will not fit the IQR chassis

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

***COATED IN OUR NEW PLATINUM LITE CERAMIC COATING***

Personalize your truck with the HPS Stainless Diesel Exhaust Tip. Size is 6" outlet 4" inlet 15" long. Made with high grade, corrosion resistant,  stainless steel. Coated in our exclusive rich metallic Platinum Lite Ceramic for maximum durability and finished with a polished stainless HPS logo. These tips come with uncoated inlet ends for easy tack welding to prevent theft.

• Stainless Steel Construction
• Platinum Lite Ceramic Coated
• Polished HPS Logo
• Weldable Inlets for Theft Prevention
• 6" outlet   4" inlet  15" long
• Easy Maintenance

**Now Available in Platinum Lite Ceramic with Ceramic Logo **

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -16.5 lbs and increasing power +3.5 HP. Elevate your fun factor with this all new silencer! The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: The HPS ProClimb silencers are not interchangeable between 2012, 2013-16 and 2017 models.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

***Now Available in Platinum Lite Ceramic with Ceramic Logo***

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -13 lbs and increasing power +3.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. No drilling or modification is needed to mount the HPS silencer. The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

***Now Available in Platinum Lite Ceramic with Ceramic Logo***

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -13 lbs and increasing power +3.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• DOES NOT FIT 2017 M8000 please see 2017 ProClimb M8000
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. No drilling or modification is needed to mount the HPS silencer. The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 M8000 models.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

Want to run a custom down-pipe cat delete exhaust on your Can-Am X3. This is an affordable option and complete DIY (Do It Yourself) kit. Includes everything you need to make your own X3 Cat Delete Down-Pipe.

Features:
- Fits stock muffler and most aftermarket mufflers
- All 304L Stainless Parts
- All precut and bent 
- (Alignment and welding required)

Includes:
- 2.5" 90 Degree U-Bend Pipe
- V-band Flange
- O2 Bung
- Foil Gasket
- Gasket placement Washer
- Spring Hook Plate
- 3 heat shield brackets
- 2.5" x 4" Flex pipe
- 2.5" slip joint pipe

Would you like to build your own exhaust muffler for your Non-Turbo Arctic Cat snowmobile?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the stock pipe and foil gasket.

Features:
- Fits all 2012+ 800, 600 Arctic Cat Non-Turbo sleds.
- 2" OD tubing cut at a total length of 1.5"
- Perfect Fit

For bulk orders and pricing, please contact us.

Would you like to build your own exhaust muffler for your Non-Turbo Ski-Doo snowmobile?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the stock pipe and foil gasket.

Features:
- Fits all 2012+ 850, 800, 650, 600, XP Chassis, XM Chassis, Gen4/Gen5 Chassis, Non-Turbo sleds.
- 2" OD tubing cut at a total length of 1.5"
- Perfect Fit

For bulk orders and pricing, please contact us.

Would you like to build your own exhaust muffler for your Non-Turbo Polaris Snowmobile?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the exit side of the stock pipe and foil gasket.

Features:
- Fits all 2011+ 850, 800, 650, 600, PRO Chassis, AXYS Chassis, Matryx Chassis, Non-Turbo sleds.
- 2" OD tubing cut at a total length of 1.5"
- Perfect Fit

For bulk orders and pricing, please contact us.

Would you like to build your own exhaust muffler for your Ski-Doo 850 Gen4/Gen5 Turbo?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the stock turbo down-pipe manifold and foil gasket.

Features:
- Fits all 2020.5 to Current Ski-Doo 850 Factory Turbo snowmobiles.
- 3" OD tubing cut at a total length of 1.5"
- Perfect Fit

For bulk orders and pricing, please contact us.

***NOW AVAILABLE***

**AVAILABLE IN OUR PLATINUM CERAMIC**

The design team went back to the drawing board for the new Mountain Max chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing weight to only 6.5 lbs and increasing power +2.5 HP. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the 2020-2021 Yamaha Mountain Max sleds

• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. 

• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.

• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

INSTALL VIDEO