DEALER ACCESS

***Please expect 1-2 weeks processing time on new orders***

Available in our Exclusive Platinum Ceramic or Bronze Coating with Frost Silver and Black Logo

Making the best performance exhaust for the new Catalyst snowmobile was no easy task. The Catalyst is one of the most nimble and exciting sleds in the industry. With the HPS Performance Exhaust you will make Catalyst even more fun; sharpening performance and throttle response, shaving over 12 lbs from the massive stock muffler, and having the best sound exhaust in the industry while staying respectable with sound levels. 

 Features
- 6 lbs. (Over 12 lbs weight savings over stock)
- Better throttle response 
- Perfect fit and easy to install 
- HPS Signature Tone

**Now Available in Platinum Lite Ceramic with Ceramic Logo **

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -16.5 lbs and increasing power +3.5 HP. Elevate your fun factor with this all new silencer! The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

NOTE: The HPS ProClimb silencers are not interchangeable between 2012, 2013-16 and 2017 models.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

***Now Available in Platinum Lite Ceramic with Ceramic Logo***

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -13 lbs and increasing power +3.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• DOES NOT FIT 2017 M8000 please see 2017 ProClimb M8000
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. No drilling or modification is needed to mount the HPS silencer. The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 M8000 models.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

***Now Available in Platinum Lite Ceramic with Ceramic Logo***

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -13 lbs and increasing power +3.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. No drilling or modification is needed to mount the HPS silencer. The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

**NOW AVAILABLE**

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing over 13 lbs and increasing power +2.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the; Alpha One, M6000 and M8000 ProClimb, SnoPro 600/800, XF 600/800, ZR 600/800, 2018-22, Riot/Riot X models.
• DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Video

***Now Available in the NEW Burnt Gold & Platinum Lite Ceramic with Ceramic Logo***

Using the super versatile Ascender chassis the blast is the best introduction to extreme backcountry riding. Where lightweight and power for aggressive riding, the HPS exhaust is the only way to go for shedding weight and having optimal performance. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• -11 lbs lighter than stock
• Suppressor is trail rated sound levels
• Fits all the; Arctic Cat Blast 400 sleds
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

***NOW AVAILABLE***

**Available in the Platinum Lite Ceramic with Ceramic Logo**

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing weight to only 6.5 lbs and increasing power +2.5 HP. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the; Alpha One, M6000 and M8000 ProClimb, SnoPro 600/800, XF 600/800, ZR 600/800, 2018-22, RIOT/RIOT X, models. 

• DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler 

• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. 

• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.

• The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.

• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

INSTALL VIDEO

***NOW AVAILABLE***

Available in our Exclusive Platinum Ceramic Coating with Black HPS Logo

Making the best performance exhaust for the new Catalyst snowmobile was no easy task. The Catalyst is one of the most nimble and exciting sleds in the industry. With the HPS Performance Exhaust you will make Catalyst even more fun; sharpening performance and throttle response, shaving over 12 lbs from the massive stock muffler, and having the best sound exhaust in the industry while staying respectable with sound levels. 

 Features
- 6 lbs. (Over 12 lbs weight savings over stock)
- Better throttle response 
- Perfect fit and easy to install 
- HPS Signature Tone

***COATED IN OUR NEW PLATINUM LITE CERAMIC COATING***

Personalize your truck with the HPS Stainless Diesel Exhaust Tip. Size is 6" outlet 4" inlet 15" long. Made with high grade, corrosion resistant,  stainless steel. Coated in our exclusive rich metallic Platinum Lite Ceramic for maximum durability and finished with a polished stainless HPS logo. These tips come with uncoated inlet ends for easy tack welding to prevent theft.

• Stainless Steel Construction
• Platinum Lite Ceramic Coated
• Polished HPS Logo
• Weldable Inlets for Theft Prevention
• 6" outlet   4" inlet  15" long
• Easy Maintenance

Love having warm food when riding your sled? This is a bracket that you can rivet to your current Trail Chef cooker pot, which will perfectly mount and align your cooker to fit on your stock or modified Ski-Doo Factory G4 Turbo.

Note:
-Fits on the Ski-Doo G4 turbo. (G5 Turbo does not have enough room to mount a muffpot)
-Comes with hole mounting template, stainless bracket, 6 stainless rivers 
-Designed for TRAIL CHEF brand cookers, may or may not work on other brand/style cooker pots
-Simple drilling, riveting, and trimming may be necessary

COATED WITH OUR PLATINUM & BRONZE CERAMIC

The all new Shredder 850 is the most powerful and effortless sled Lynx has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.

Features:

• 2023-2025 Lyxz Shredder Platform (Gen-5)
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Platinum Lite Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

INSTALL VIDEO

 ***Please allow 2 weeks processing time for this item***

Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.

Thank you for your support.

***Expected Back in Stock Mid October***

COATED WITH OUR PLATINUM CERAMIC

The all new Lynx 850 is the most powerful and effortless sled Lynx has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.

Features:

• FITS: LYNX 850 Boondocker and Sports models
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Platinum Lite Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

***Limited Supply***

HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS 9R (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +5  HP gain and +3 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.

HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 9R silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

Features: 

•  Double Walled for sound quality and vibration reduction
• (-9 lbs weight reduction from stock)
• +5 HP increase in the mid range and +3 at peak RPM (8200-8250 RPM)
• Dyno tuned and field tested for best performance and durability
• Ceramic Coating rated at 2000 degrees
• Webbed mounting brackets for maximum strength and weight reduction
• Baffled Multi-chambered Core
• HPS Quality and Sound

Fits:
2019-26 Polaris AXYS & MATRYX Patriot 9R & 850 motor on RMK / Khaos / Rush / Switchback / INDY

NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds.
All results are tested at complete break-in and stock parameters
(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

INSTALL VIDEO

***NOW AVAILABLE***

Now available in our Platinum Lite Ceramic with Ceramic Logo

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Recommended peak engine setting 8150 RPM

INSTALL VIDEO

The pipe on the Polaris AXYS sled has a tendency to rub on inside mount of the bumpers. When running an aftermarket muffler the pipe supports also run risk of rubbing on the cross member under the pipe.  These are common issues with most aftermarket mufflers and even the stock muffler on the AXYS chassis.

This Bracket allows you to use a second spring to pull forward on the pipe which prevent the pipe support rubbing on the cross member under the pipe as well as stops the pipe from rubbing on the bumper at the same time. 

***These brackets will come with any new Polaris 600/800/850 AXYS HPS muffler order ***

**NOW AVAILABLE **

Keep your tools and gear warm and protected with the HPS Under-the-hood Storage bag for the Polaris Boost sled. Utilizing the unused void above the oil tank, this is perfect for keeping a spare set of gloves and goggles warm. 

Features:
-Light weight, powder coated, aluminum bracket 
-Durable, heat and water resistant storage bag with multiple storage compartments
-Helps hold the oil tank from shaking and vibrating when riding
-Bracket and bag weighs just over 1.5lbs

The pipe on the Polaris Matryx sled has a tendency to rub on inside mount of the bumpers. When running an aftermarket muffler the pipe supports also run risk of rubbing on the cross member under the pipe.  These are common issues with most aftermarket mufflers and even the stock muffler on the matryx chassis.

This Bracket allows you to use a second spring to pull forward on the pipe which prevent the pipe support rubbing on the cross member under the pipe as well as stops the pipe from rubbing on the bumper at the same time. 

***These brackets will come with any new Polaris 650/850/9R muffler order ***

***Limited Supply***

HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS AXYS & MATRXY (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +4.5 HP gain and +2.5 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating. 

HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 850/650 silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

Features: 

•  Double Walled for sound quality and vibration reduction
• (-9 lbs weight reduction from stock)
• +4 HP increase in the mid range and +2.5 at peak RPM (8050-8150 RPM)
• Dyno tuned and field tested for best performance and durability
• Ceramic Coating rated at 2000 degrees
• Webbed mounting brackets for maximum strength and weight reduction
• Baffled Multi-chambered Core
• HPS Quality and Sound

Fits:
2019-26 Polaris AXYS & MATRYX Patriot 850/650 motor on RMK / Khaos / Rush / Switchback / INDY

NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds.
All results are tested at complete break-in and stock parameters
(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
Recommended peak engine setting 8150 RPM

Related Videos:

INSTALL VIDEO

*Coated in our Platinum Light Ceramic*

HPS through extensive field and dyno testing has developed an all new exhaust silencer for the POLARIS BOOST. Compatible with the stock ECM programming with an impressive -7.5 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.

HPS is conscientious of maintaining respectable sound levels. This new PATRIOT Boost silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven our designs with supplying two decades of lightweight and durable snowmobile silencers.

Features: 

•  Double Walled for sound quality and vibration reduction
• (-7.5 lbs weight reduction from stock)
• +4 HP increase in the mid range and +2 at peak RPM
• Dyno tuned and field tested for best performance and durability
• Ceramic Coating rated at 2000 degrees
• Webbed mounting brackets for maximum strength and weight reduction
• Baffled Multi-chambered Core
• HPS Quality and Sound

Fits:
2022-25 Polaris Boost Sleds

NOTE: Does not fit or work on Polaris AXYS 600/800 or 850 NA Sleds.
All results are tested at complete break-in and stock parameters
(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
Recommended peak engine setting 8200 RPM

INSTALL VIDEO

12" Ski-DOO/LYNX EGT extended loom for the 2019-2024 Gen-4 and Gen-5 Snowmobiles.

PLEASE NOTE: 

• May not fit Gen4/5 Enduro Wide body Sled plugs 
• May not fit 2017-18 gen4 850
• (Does not include EGT PROB)

**NOW AVAILABLE**

The Ski-Doo E-Tec motor is a catalyst of power and clean running engines. Put more power to your Ski-Doo E-Tec combined with the deep signature sound of our HPS silencer. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

Features

• 12.5 LBS weight loss from stock
• +3.5 HP above stock
• Recommended peak engine setting 7900-8000 RPM
  
• D shape Bung for EGT prob and Stock lock washer

Fits:
E-Tec XM 800 2017 Models
E-Tec XM 800 2012-16
E-Tec XP 800 2011-12
E-Tec T3
E-Tec Renegade
E-Tec Freeride
E-Tec 600 2012-2017
*does not fit Gen-4 850 Chassis

NOTE: All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

COATED WITH OUR PLATINUM CERAMIC

The all new Gen-4 600R is the most powerful and effortless sled 600 has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The Platinum Ceramic is a rich metallic finish rated for 22000 degrees.

Features:

• 2019-23 Gen-4 600R
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +4 HP increase in the mid range (7200 RPM) and +2 HP on the top end (8000 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Burnt Gold Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE:

All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

https://youtu.be/3v3JR_GUqnc

https://youtu.be/1jjvGNO0rSA

https://youtu.be/SiOdRP7TAvI

COATED WITH OUR PLATINUM CERAMIC

The all new Gen-4 850 is the most powerful and effortless sled Ski-Doo has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.

Features:

• 2017-2022 Gen 4 850 E-TEC / MXZ / Renegade /Summit/Freeride
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Platinum Lite Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

***IN STOCK***

Running the stock heat shield shells are required.

The HPS exhaust for the Ski-Doo G5 850 Turbo is the perfect combination of performance, durability, light weight, and sound quality. This is the only performance muffler designed for the Factory Turbo with an aftermarket down pipe manifold made to utilize space and allow room for the HPS heat storage bracket and bag.

FEATURES 

• Light weight ceramic coated performance muffler & downpipe manifold
• -9.4 lbs lighter than stock
• +2 HP gain with a stronger and broader top end
• Quite deep tone 
• includes 12" EGT wire loom extension for stock temperature probe

Thank you for your support.

***LIMITED AVAILABILITY***

COATED WITH OUR PLATINUM & BRONZE CERAMIC

The all new Gen-5 850 is the most powerful and effortless sled Ski-Doo has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.

Features:

• 2023-2025 Gen-5 850 E-TEC / MXZ / Renegade /Summit/Freeride
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Platinum Lite Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

***Available in our Platinum Lite Ceramic***

With combining modern technology of the Ski-Doo chassis that REVolutionized snowmobiling, HPS offers a silencer that will add just that much more fun to your 03 Rev 800. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

*** IN-STOCK READY TO SHIP***

The HPS exhaust for the Ski-Doo Gen4 850 Turbo is the perfect combination of performance, durability, light weight, and sound quality. This is the only performance muffler designed for the Factory Turbo with an aftermarket down pipe manifold made to utilize space and allow room for the HPS heat storage bracket and bag (available here).  Recreated from the ground up with our unique double walled, dual chamber design that gives the customer the durability and that deep HPS Signature tone that our customers love. 

FEATURES 

• Light weight ceramic coated performance muffler & downpipe manifold
• -9.4 lbs lighter than stock
• +2 HP gain with a stronger and broader top end
• Quite deep tone 
• includes 12" EGT wire loom extension for stock temperature prob

Optional Trail Chef Muff Pot now available.

Optional storage bag now available 

Warn your buddies that you will not be taking it easy on them this winter. The HPS "WARNING: Powder Coating in Progress" T-shirt is fun way to show everyone you are a true rider!

-Form fitting and high quality Fabric
-Fabric laundered, 4.3 oz., 60/40 combed ringspun cotton/polyester, 32 singles
-Set-in 1x1 baby rib collar
-Tear away label

Everyone enjoys a warm meal while out on a cold snowmobile ride, but finding a place to mount a cooker pot on you Factory Gen4 Turbo is almost impossible. HPS has created a bracket specifically for securely mounting a Trail Chef Muff Pot Cooker onto your Ski-Doo Factory 850 Turbo which will work perfect for not only a stock set up, but also works with the HPS any other aftermarket muffler set up you choose to ride. Strategically placed to keep your food the warmest and most accessible.

Mounts directly to the exhaust manifold Flange by way of stainless HPS bracket for best heat transfer. 

(Some minor modification/trimming may be necessary on the outer heat shield of the stock downpipe manifold)

***NOW AVAILABLE***

The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing over 13 lbs and increasing power +2.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the; 2020-2021 Yamaha Mountain Max 800 Sleds
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Video
 

***NOW AVAILABLE***

**AVAILABLE IN OUR PLATINUM CERAMIC**

The design team went back to the drawing board for the new Mountain Max chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing weight to only 6.5 lbs and increasing power +2.5 HP. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• Fits all the 2020-2021 Yamaha Mountain Max sleds

• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. 

• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.

• All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

INSTALL VIDEO

***Now Available in the NEW Burnt Gold & Platinum Lite Ceramic with Ceramic Logo***

Using the super versatile Ascender chassis the blast is the best introduction to extreme backcountry riding. Where lightweight and power for aggressive riding, the HPS exhaust is the only way to go for shedding weight and having optimal performance. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!

NOTE:

• -11 lbs lighter than stock
• Suppressor is trail rated sound levels
• Fits all the; YAMAHA VENOM 400 sleds
• Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
• Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
• All results are tested with stock parameters with HPS muffler.

INSTALL VIDEO