Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.
Running the stock heat shield shells are required.
Storage on the Ski-Doo Gen4/G5 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood. Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4/G5 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together.
Bag handle can be unwound for ten feet of emergency paracord
Handle can also be used for an emergency wristband with whistle
Multiple storage compartments for multiple uses
Bag dimensions (9.5"x4.5"x4.5")
NOTE
Fits most Naturally Aspirated and Turbo Ski-Doo Gen4/G5 sleds with SHOT mounts and HPS muffler
Mounts to stock chaincase behind the SHOT module (requires SHOT mounts on chaincase for mounting bag bracket)(2017 Gen4 sleds did not have shot and therefor will not mount to a 2017 Gen 4 chaincase)
Storage on the Ski-Doo Gen4 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood. Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together.
FEATURES
Very durable and heat resistant insulated fabric
Durable soft-touch internal fabric
Heavy duty water resistant zippers
Bag handle can be unwound for ten feet of emergency paracord
Handle can also be used for an emergency wristband with whistle
HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS 9R (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +5 HP gain and +3 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.
HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 9R silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Features:
Double Walled for sound quality and vibration reduction
(-9 lbs weight reduction from stock)
+5 HP increase in the mid range and +3 at peak RPM (8200-8250 RPM)
Dyno tuned and field tested for best performance and durability
Ceramic Coating rated at 2000 degrees
Webbed mounting brackets for maximum strength and weight reduction
NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds. All results are tested at complete break-in and stock parameters (Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
(DICOUNTED 9R/850 MUFFLERS ARE DUE TO SCRATCH AND DENT REASONS or MINOR MANUFACTURING DEFECTS. THEY ARE NOT AFFECTED IN FIT or PERFORMANCE AND WILL WORK AS NORMALLY EXPECTED)
HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS 9R (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +4.5 HP gain and +2.5 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.
HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 9R silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Features:
Double Walled for sound quality and vibration reduction
(-9 lbs weight reduction from stock)
+4 HP increase in the mid range and +2.5 at peak RPM (8200-8250 RPM)
Dyno tuned and field tested for best performance and durability
Ceramic Coating rated at 2000 degrees
Webbed mounting brackets for maximum strength and weight reduction
Baffled Multi-chambered Core
HPS Quality and Sound
Fits: 2019-22 Polaris AXYS & MATRYX Patriot 850/9R motor on RMK / Khaos / Rush / Switchback / INDY
NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds. All results are tested at complete break-in and stock parameters (Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
Storage on the Ski-Doo Gen4 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood. Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together.
FEATURES
Very durable and heat resistant insulated fabric
Durable soft-touch internal fabric
Heavy duty water resistant zippers
Bag handle can be unwound for ten feet of emergency paracord
Handle can also be used for an emergency wristband with whistle
HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS AXYS & MATRXY (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +4.5 HP gain and +2.5 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.
HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 850 silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Features:
Double Walled for sound quality and vibration reduction
(-9 lbs weight reduction from stock)
+4 HP increase in the mid range and +2.5 at peak RPM (8050-8150 RPM)
Dyno tuned and field tested for best performance and durability
Ceramic Coating rated at 2000 degrees
Webbed mounting brackets for maximum strength and weight reduction
Baffled Multi-chambered Core
HPS Quality and Sound
Fits: 2019-22 Polaris AXYS & MATRYX Patriot 850 motor on RMK / Khaos / Rush / Switchback / INDY
NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds. All results are tested at complete break-in and stock parameters (Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM) Recommended peak engine setting 8150 RPM
**Available in the Platinum Lite Ceramic with Ceramic Logo**
The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing weight to only 6.5 lbs and increasing power +2.5 HP. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!
NOTE:
Fits all the; Alpha One, M6000 and M8000 ProClimb, SnoPro 600/800, XF 600/800, ZR 600/800, 2018-22, RIOT/RIOT X, models.
DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
All results are tested with stock parameters with HPS muffler.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)
The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing over 13 lbs and increasing power +2.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!
NOTE:
Fits all the; Alpha One, M6000 and M8000 ProClimb, SnoPro 600/800, XF 600/800, ZR 600/800, 2018-22, Riot/Riot X models.
DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
All results are tested with stock parameters with HPS muffler.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)
***Now Available in Platinum Lite Ceramic with Ceramic Logo***
The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -13 lbs and increasing power +3.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!
NOTE:
DOES NOT FIT 2017 M8000 please see 2017 ProClimb M8000
Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. No drilling or modification is needed to mount the HPS silencer. The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 M8000 models.
All results are tested with stock parameters with HPS muffler.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)
***Now Available in Platinum Lite Ceramic with Ceramic Logo***
The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing an amazing -13 lbs and increasing power +3.5 HP. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!
NOTE:
DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets. No drilling or modification is needed to mount the HPS silencer. The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
All results are tested with stock parameters with HPS muffler.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)
Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.
Storage on the Ski-Doo Gen4/G5 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood. Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4/G5 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together.
Bag handle can be unwound for ten feet of emergency paracord
Handle can also be used for an emergency wristband with whistle
Multiple storage compartments for multiple uses
Bag dimensions (9.5"x4.5"x4.5")
NOTE
Fits most Naturally Aspirated and Turbo Ski-Doo Gen4/G5 sleds with SHOT mounts and HPS muffler
Mounts to stock chaincase behind the SHOT module (requires SHOT mounts on chaincase for mounting bag bracket)(2017 Gen4 sleds did not have shot and therefor will not mount to a 2017 Gen 4 chaincase)
Storage on the Ski-Doo Gen4 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood. Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together.
FEATURES
Very durable and heat resistant insulated fabric
Durable soft-touch internal fabric
Heavy duty water resistant zippers
Bag handle can be unwound for ten feet of emergency paracord
Handle can also be used for an emergency wristband with whistle
Need a V-band flange for a down-pipe DIY (Do It Yourself) project? This V-band flange is a perfect fit on any Can-am X3 stock turbo to 2.5" exhaust tubing.
Features: - Stainless Construction - Fits Perfect to any stock X3 Turbo - Necked down to fit any 2.5" OD exhaust tube
Want to run a custom down-pipe cat delete exhaust on your Can-Am X3. This is an affordable option and complete DIY (Do It Yourself) kit. Includes everything you need to make your own X3 Cat Delete Down-Pipe.
Features: - Fits stock muffler and most aftermarket mufflers - All 304L Stainless Parts - All precut and bent - (Alignment and welding required)
Would you like to build your own exhaust muffler for your Non-Turbo Arctic Cat snowmobile? Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the stock pipe and foil gasket.
Features: - Fits all 2012+ 800, 600 Arctic Cat Non-Turbo sleds. - 2" OD tubing cut at a total length of 1.5" - Perfect Fit
