SKI-DOO

***19-22 IN-STOCK READY TO SHIP***

COATED WITH OUR PLATINUM CERAMIC

The all new Gen-4 850 is the most powerful and effortless sled Ski-Doo has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.

Features:

• 2017-2022 Gen 4 850 E-TEC / MXZ / Renegade /Summit/Freeride
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Platinum Lite Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE: All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

***CURRENTLY BACK IN STOCK***

Everyone enjoys a warm meal while out on a cold snowmobile ride, but finding a place to mount a cooker pot on you Factory Gen4 Turbo is almost impossible. HPS has created a bracket specifically for securely mounting a Trail Chef Muff Pot Cooker onto your Ski-Doo Factory 850 Turbo which will work perfect for not only a stock set up, but also works with the HPS any other aftermarket muffler set up you choose to ride. Strategically placed to keep your food the warmest and most accessible.

Mounts directly to the exhaust manifold Flange by way of stainless HPS bracket for best heat transfer. 

(Some minor modification/trimming may be necessary on the outer heat shield of the stock downpipe manifold)

*** IN-STOCK READY TO SHIP***

The HPS exhaust for the Ski-Doo Gen4 850 Turbo is the perfect combination of performance, durability, light weight, and sound quality. This is the only performance muffler designed for the Factory Turbo with an aftermarket down pipe manifold made to utilize space and allow room for the HPS heat storage bracket and bag (available here).  Recreated from the ground up with our unique double walled, dual chamber design that gives the customer the durability and that deep HPS Signature tone that our customers love. 

FEATURES 

• Light weight ceramic coated performance muffler & downpipe manifold
• -9.4 lbs lighter than stock
• +2 HP gain with a stronger and broader top end
• Quite deep tone 
• includes 12" EGT wire loom extension for stock temperature prob

Optional Trail Chef Muff Pot now available.

Optional storage bag now available 

12" Ski-DOO/LYNX EGT extended loom for the 2019-2024 Gen-4 and Gen-5 Snowmobiles.

PLEASE NOTE: 

• May not fit Gen4/5 Enduro Wide body Sled plugs 
• May not fit 2017-18 gen4 850
• (Does not include EGT PROB)

***NOW AVAILABLE***

Storage on the Ski-Doo Gen4/G5 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood.  Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4/G5 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together. 

FEATURES

• Light weight, powder coated, aluminum mounting bracket
• Very durable and heat resistant insulated fabric
• Durable soft-touch internal fabric
• Heavy duty water resistant zippers
• Bag handle can be unwound for ten feet of emergency paracord 
• Handle can also be used for an emergency wristband with whistle
• Multiple storage compartments for multiple uses
• Bag dimensions (9.5"x4.5"x4.5")

NOTE

• Fits most Naturally Aspirated and Turbo Ski-Doo Gen4/G5 sleds with SHOT mounts and HPS muffler
• Mounts to stock chaincase behind the SHOT module (requires SHOT mounts on chaincase for mounting bag bracket)(2017 Gen4 sleds did not have shot and therefor will not mount to a 2017 Gen 4 chaincase)

Love having warm food when riding your sled? This is a bracket that you can rivet to your current Trail Chef cooker pot, which will perfectly mount and align your cooker to fit on your stock or modified Ski-Doo Factory Turbo.

Note:
-Comes with hole mounting template, stainless bracket, 6 stainless rivers 
-Designed for TRAIL CHEF brand cookers, may or may not work on other brand/style cooker pots
-Simple drilling, riveting, and trimming may be necessary

***Limited quantities in stock and ready to ship!!***

Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.

Running the stock heat shield shells are required.

Thank you for your support.

**NOW AVAILABLE**

The Ski-Doo E-Tec motor is a catalyst of power and clean running engines. Put more power to your Ski-Doo E-Tec combined with the deep signature sound of our HPS silencer. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.

Features

• 12.5 LBS weight loss from stock
• +3.5 HP above stock
• Recommended peak engine setting 7900-8000 RPM
  
• D shape Bung for EGT prob and Stock lock washer

Fits:
E-Tec XM 800 2017 Models
E-Tec XM 800 2012-16
E-Tec XP 800 2011-12
E-Tec T3
E-Tec Renegade
E-Tec Freeride
E-Tec 600 2012-2017
*does not fit Gen-4 850 Chassis

NOTE: All results are tested with stock parameters with HPS muffler.

(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)

Product Videos

*** NOW AVAILABLE ***

COATED WITH OUR PLATINUM CERAMIC

The all new Gen-4 600R is the most powerful and effortless sled 600 has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The Platinum Ceramic is a rich metallic finish rated for 22000 degrees.

Features:

• 2019-21 Gen-4 600R
• 7.2 lbs (-9 lbs weight reduction from stock)
• Over +4 HP increase in the mid range (7200 RPM) and +2 HP on the top end (8000 Peak RPM)
• Comes with 12" EGT extension
• Dyno tuned and field tested for best performance and durability
• Burnt Gold Ceramic Coating rated at 2200 degrees
• Bracket holes are pressed rounded for maximum life of rubber cushions
• Webbed mounting brackets for maximum strength and weight reduction
• D shaped bung for securing temperature probe
• CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)

NOTE:

All results are tested at complete break-in and stock parameters

(Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)

Product Videos

https://youtu.be/3v3JR_GUqnc

https://youtu.be/1jjvGNO0rSA

https://youtu.be/SiOdRP7TAvI

***NOW AVAILABLE***

***Estimated End of December/ Early January release date***

Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.

Thank you for your support.

***NOW AVAILABLE***

Storage on the Ski-Doo Gen4 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood.  Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together. 

FEATURES

• Very durable and heat resistant insulated fabric
• Durable soft-touch internal fabric
• Heavy duty water resistant zippers
• Bag handle can be unwound for ten feet of emergency paracord 
• Handle can also be used for an emergency wristband with whistle
• Multiple storage compartments for multiple uses

Would you like to build your own exhaust muffler for your Non-Turbo Ski-Doo snowmobile?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the stock pipe and foil gasket.

Features:
- Fits all 2012+ 850, 800, 650, 600, XP Chassis, XM Chassis, Gen4/Gen5 Chassis, Non-Turbo sleds.
- 2" OD tubing cut at a total length of 1.5"
- Perfect Fit

For bulk orders and pricing, please contact us.

Would you like to build your own exhaust muffler for your Ski-Doo 850 Gen4/Gen5 Turbo?  Then you will need a Bell Flange for your project. With your choice of 304L Stainless Tubing or Carbon Steel, these bell flanges are flared to a perfect fit for the stock turbo down-pipe manifold and foil gasket.

Features:
- Fits all 2020.5 to Current Ski-Doo 850 Factory Turbo snowmobiles.
- 3" OD tubing cut at a total length of 1.5"
- Perfect Fit

For bulk orders and pricing, please contact us.