The all new Gen-4 850 is the most powerful and effortless sled Ski-Doo has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.
Features:
2017-2022 Gen 4 850 E-TEC / MXZ / Renegade /Summit/Freeride
7.2 lbs (-9 lbs weight reduction from stock)
Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
Comes with 12" EGT extension
Dyno tuned and field tested for best performance and durability
Platinum Lite Ceramic Coating rated at 2200 degrees
Bracket holes are pressed rounded for maximum life of rubber cushions
Webbed mounting brackets for maximum strength and weight reduction
D shaped bung for securing temperature probe
CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)
NOTE: All results are tested at complete break-in and stock parameters
Everyone enjoys a warm meal while out on a cold snowmobile ride, but finding a place to mount a cooker pot on you Factory Gen4 Turbo is almost impossible. HPS has created a bracket specifically for securely mounting a Trail Chef Muff Pot Cooker onto your Ski-Doo Factory 850 Turbo which will work perfect for not only a stock set up, but also works with the HPS any other aftermarket muffler set up you choose to ride. Strategically placed to keep your food the warmest and most accessible.
Mounts directly to the exhaust manifold Flange by way of stainless HPS bracket for best heat transfer.
(Some minor modification/trimming may be necessary on the outer heat shield of the stock downpipe manifold)
HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS AXYS & MATRXY (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +4.5 HP gain and +2.5 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.
HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 850 silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Features:
Double Walled for sound quality and vibration reduction
(-9 lbs weight reduction from stock)
+4 HP increase in the mid range and +2.5 at peak RPM (8050-8150 RPM)
Dyno tuned and field tested for best performance and durability
Ceramic Coating rated at 2000 degrees
Webbed mounting brackets for maximum strength and weight reduction
Baffled Multi-chambered Core
HPS Quality and Sound
Fits: 2019-22 Polaris AXYS & MATRYX Patriot 850 motor on RMK / Khaos / Rush / Switchback / INDY
NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds. All results are tested at complete break-in and stock parameters (Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM) Recommended peak engine setting 8150 RPM
The HPS exhaust for the Ski-Doo Gen4 850 Turbo is the perfect combination of performance, durability, light weight, and sound quality. This is the only performance muffler designed for the Factory Turbo with an aftermarket down pipe manifold made to utilize space and allow room for the HPS heat storage bracket and bag (available here). Recreated from the ground up with our unique double walled, dual chamber design that gives the customer the durability and that deep HPS Signature tone that our customers love.
Storage on the Ski-Doo Gen4/G5 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood. Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4/G5 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together.
Bag handle can be unwound for ten feet of emergency paracord
Handle can also be used for an emergency wristband with whistle
Multiple storage compartments for multiple uses
Bag dimensions (9.5"x4.5"x4.5")
NOTE
Fits most Naturally Aspirated and Turbo Ski-Doo Gen4/G5 sleds with SHOT mounts and HPS muffler
Mounts to stock chaincase behind the SHOT module (requires SHOT mounts on chaincase for mounting bag bracket)(2017 Gen4 sleds did not have shot and therefor will not mount to a 2017 Gen 4 chaincase)
The NEW HPS Performance Insert/spark arrestor is the easiest and most affordable performance you can add to your Yamaha YXZ1000R Side x Side. Constructed with a 100% forest approved non-corrosive, high quality 304L Stainless Steel spark arrestor screen allowing you to not only add over +4 HP to your machine but keep you completely responsible and legal as you continue to enjoy your favorite recreational areas. With 60% more flow through your stock exhaust and more performance sound there is no need to buy loud slip-ons or expensive full exhaust systems. Coated in our Platinum Lite Ceramic for heat retention and a rich metallic finish.
NOTE: Plugging the exhaust smog vents on engine valve cover is recommended/necessary when doing any performance mods to the YXZ.
Features: -Dyno tested and proven. -Minimal increase in sound levels for a quiet system. -All stainless steel construction. -Oversize outlet. -100% forest approved. -Very affordable and easy to install.
***Limited quantities in stock and ready to ship!!***
Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.
Running the stock heat shield shells are required.
**Available in the Platinum Lite Ceramic with Ceramic Logo**
The design team went back to the drawing board for the new ProClimb chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing weight to only 6.5 lbs and increasing power +2.5 HP. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!
NOTE:
Fits all the; Alpha One, M6000 and M8000 ProClimb, SnoPro 600/800, XF 600/800, ZR 600/800, 2018-22, RIOT/RIOT X, models.
DOES NOT FIT 2017 MOUNTAIN CAT please see 2017 Mountain Cat muffler
Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
The HPS ProClimb silencers are not interchangeable between 2012, 2013-16, and 2017 Mountain Cat models.
All results are tested with stock parameters with HPS muffler.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)
***Estimated End of December/ Early January release date***
Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.
The all new Lynx 850 is the most powerful and effortless sled Lynx has ever released. We are very excited to do what we do best, increasing performance and making this most capable sled even more enjoyable. Coupled with our Double Walled Design which greatly decreases under the hood heat and also reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. The New Platinum Lite Ceramic is a rich metallic finish rated for 2200 degrees and twice as durable as our previous polished coating.
Features:
FITS: LYNX 850 Boondocker and Sports models
7.2 lbs (-9 lbs weight reduction from stock)
Over +5 HP increase in the mid range (7200 RPM) and +3 HP on the top end (7950 Peak RPM)
Comes with 12" EGT extension
Dyno tuned and field tested for best performance and durability
Platinum Lite Ceramic Coating rated at 2200 degrees
Bracket holes are pressed rounded for maximum life of rubber cushions
Webbed mounting brackets for maximum strength and weight reduction
D shaped bung for securing temperature probe
CNC mandrel bent inlet tube to fit stock heat shield (not necessary with platinum coating)
NOTE: All results are tested at complete break-in and stock parameters
HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS 9R (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +5 HP gain and +3 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.
HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 9R silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Features:
Double Walled for sound quality and vibration reduction
(-9 lbs weight reduction from stock)
+5 HP increase in the mid range and +3 at peak RPM (8200-8250 RPM)
Dyno tuned and field tested for best performance and durability
Ceramic Coating rated at 2000 degrees
Webbed mounting brackets for maximum strength and weight reduction
NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds. All results are tested at complete break-in and stock parameters (Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
(DICOUNTED 9R/850 MUFFLERS ARE DUE TO SCRATCH AND DENT REASONS or MINOR MANUFACTURING DEFECTS. THEY ARE NOT AFFECTED IN FIT or PERFORMANCE AND WILL WORK AS NORMALLY EXPECTED)
HPS through extensive field and dyno testing has developed an all new exhaust silencer for the NEW POLARIS 9R (NON TURBO). Results: Improved performance through-out the entire power curve, increased throttle response in the mid-range with +4.5 HP gain and +2.5 HP gain at the top end. Compatible with the stock ECM programming. An impressive -9 lbs weigh reduction. The Ceramic is a rich metallic finish rated for 2000 degrees and twice as durable as our previous cermachrome polished coating.
HPS is conscientious of maintaining respectable sound levels. This new PATRIOT 9R silencer develops only 4 dbs over stock at wide open throttle while maintaining the highly desired HPS signature tone. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers.
Features:
Double Walled for sound quality and vibration reduction
(-9 lbs weight reduction from stock)
+4 HP increase in the mid range and +2.5 at peak RPM (8050-8150 RPM)
Dyno tuned and field tested for best performance and durability
Ceramic Coating rated at 2000 degrees
Webbed mounting brackets for maximum strength and weight reduction
Baffled Multi-chambered Core
HPS Quality and Sound
Fits: 2019-22 Polaris AXYS & MATRYX Patriot 850/9R motor on RMK / Khaos / Rush / Switchback / INDY
NOTE: Does not fit or work on Polaris AXYS 800 or 600 Sleds. All results are tested at complete break-in and stock parameters (Passes SAE J-2567 sound test approved below 88 dbs 4000 RPM)
Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.
The NEW HPS Can-Am Maverick X3 Cat Delete. Constructed with 304L Stainless Steel with high grade stainless steel flex pipe. Coated in our exclusive rich metallic Platinum Lite Ceramic for maximum durability and heat retention (no heat shields required). "LARGE MOUTH" 2.5" outlet for minimal restriction and allows to be used with any aftermarket muffler that fits stock placement on up to a 2.5" inlet.
Storage on the Ski-Doo Gen4 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood. Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together.
FEATURES
Very durable and heat resistant insulated fabric
Durable soft-touch internal fabric
Heavy duty water resistant zippers
Bag handle can be unwound for ten feet of emergency paracord
Handle can also be used for an emergency wristband with whistle
Sled manufactures are known to change fitment and tuning from early prototype sleds to production sleds. HPS mufflers go through extensive testing and we will not release our exhaust products until verified with the production sleds. You will be able to expect the same quality of performance, sound and durability you have always received from previous HPS products.
The design team went back to the drawing board for the new Mountain Max chassis. Our goals were to create a lite weight silencer with durability, passing sound qualities and performance demanded by our customers. HPS has meet these design goals by reducing weight to only 6.5 lbs and increasing power +2.5 HP. Coupled with our Double Walled Design that greatly decreases under the hood heat and reduces harmful engine harmonics. HPS has proven their designs with supplying two decades of lightweight and durable snowmobile silencers. Elevate your fun factor with this all new silencer!
NOTE:
Fits all the 2020-2021 Yamaha Mountain Max sleds
Holes in the base plate of the HPS silencer are designed to slip over the stock outlet rivets.
Drilling of one rivet and securing the muffler to the belly pan with one #10 bolt (included) is mandatory for guaranteed secured mounting for aggressive riding.
All results are tested with stock parameters with HPS muffler.
(Passes SAE J-2567 sound test approved below 88dbs 4000RPM)