CAN-AM

The NEW HPS Can-Am Maverick X3 Cat Delete. Constructed with 304L Stainless Steel with high grade stainless steel flex pipe. Coated in our exclusive rich metallic Platinum Lite Ceramic for maximum durability and heat retention (no heat shields required). "LARGE MOUTH" 2.5" outlet for minimal restriction and allows to be used with any aftermarket muffler that fits stock placement on up to a 2.5" inlet.

• 304L Stainless Steel
• "LARGE MOUTH" 2.5" outlet for minimum restriction
• Stainless Steel Flex Pipe
• Ceramic Coated
• +6 HP
• No fuel box or programmer necessary

***NOW AVAILABLE***

Storage on the Ski-Doo Gen4 sled is very limited so HPS strategically designed our performance exhausts to allow room for extra heated storage under the hood.  Move unwanted weight out of your backpack or tunnel bag and keep yourself light and nimble for easy maneuverability. Ski-Doo has engineered the Gen4 platform to be as balance as possible yet no one wants to run the weight of the stock exhaust. HPS has developed a way to help keep your sled balanced while shedding weight with our water resistant, under the hood, heated storage bag. Large enough to store am extra pair of goggles, gloves, tools, snacks and other supplies together. 

FEATURES

• Very durable and heat resistant insulated fabric
• Durable soft-touch internal fabric
• Heavy duty water resistant zippers
• Bag handle can be unwound for ten feet of emergency paracord 
• Handle can also be used for an emergency wristband with whistle
• Multiple storage compartments for multiple uses

***AVAILABLE IN OUR PLATINUM LITE CERAMIC COATING***

The NEW HPS 1st Gen Can-Am Maverick 1000R performance tuned exhausts are the easiest and most affordable performance you can add to your Can-Am machine. Increasing more than 100% flow and adding over +4.5 HP over stock. Constructed with non-corrosive, high quality, 304L stainless steel and includes two HPS performance style 100% forest approved spark arrestor tips, allowing you to be completely responsible as you continue to enjoy your favorite recreational areas. Coated in our Platinum Lite Ceramic for heat retention and a rich metallic finish. These double chambered dual slip-ons make the V-TWIN 1000R motor sound like a tuned V8 trophy truck. They are the best sounding exhausts ever made for a Side X Side.

Features:
-Dyno tested and proven.
-Double chambered dual exhaust sound.
-All stainless steel construction.
-Oversize outlet.
-100% forest approved.
-Affordable and easy to install.

Need a V-band flange for a down-pipe DIY (Do It Yourself) project? This V-band flange is a perfect fit on any Can-am X3 stock turbo to 2.5" exhaust tubing.

Features:
- Stainless Construction
- Fits Perfect to any stock X3 Turbo
- Necked down to fit any 2.5" OD exhaust tube

Want to run a custom down-pipe cat delete exhaust on your Can-Am X3. This is an affordable option and complete DIY (Do It Yourself) kit. Includes everything you need to make your own X3 Cat Delete Down-Pipe.

Features:
- Fits stock muffler and most aftermarket mufflers
- All 304L Stainless Parts
- All precut and bent 
- (Alignment and welding required)

Includes:
- 2.5" 90 Degree U-Bend Pipe
- V-band Flange
- O2 Bung
- Foil Gasket
- Gasket placement Washer
- Spring Hook Plate
- 3 heat shield brackets
- 2.5" x 4" Flex pipe
- 2.5" slip joint pipe

 

***THIS KIT IS FOR THE MAVERICK 1000R DS TURBO***

The NEW HPS 1st Gen Can-Am Maverick 1000R performance tuned exhausts are the easiest and most affordable performance you can add to your Can-Am machine. Increasing more than 100% flow and adding over +4.5 HP over stock. Constructed with non-corrosive, high quality, 304L stainless steel and includes two HPS performance style 100% forest approved spark arrestor tips, allowing you to be completely responsible as you continue to enjoy your favorite recreational areas. Coated in our Platinum Lite Ceramic for heat retention and a rich metallic finish. These double chambered dual slip-ons make the V-TWIN 1000R motor sound like a tuned V8 trophy truck. They are the best sounding exhausts ever made for a Side X Side.

Features:
-Dyno tested and proven.
-Double chambered dual exhaust sound.
-All stainless steel construction.
-Oversize outlet.
-100% forest approved.
-Affordable and easy to install.

The AFR+ brings together two technologies within one system to make it the most powerful, user-friendly tuning device on the market. AFR+ combines an EFI controller with a wideband O2 sensor and AFR gauge to provide a user instant fuel trimming ability and feedback about their vehicles state of tune.

The AFR+ can handle ALL your fueling needs or COMPLIMENT ECU downloads or already installed EFI controllers. The AFR gauge allows you to KNOW exactly how well your tune-up is performing. The EFI fueling allows you to CONTROL any necessary fine tuning without spending more money or valuable time.

BETTER FUEL MILEAGE – The AFR+ pays for itself! SAVING YOU $$$
The information the AFR gauge displays is all you need to get the best fuel mileage out of your vehicle. The AFR+ can be used alone or in combination with your existing fuel controller or mapping software. With a low retail cost, the AFR+ can pay for itself in ONLY 3500 miles.

BETTER HORSEPOWER and TORQUE
The AFR+ allows your vehicle to be optimized to get the best horsepower and torque for the current modifications.

FUEL INJECTION CONTROL – AUTO-TUNE or FUEL TRIMMING
The AFR+ has built in a piggy-back EFI control system. A piggy-back EFI control system is one where it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The AFR+ can be computer programmed into an auto-tune or a fuel trimmingoperation mode. The auto-tune mode instantly makes adjustments to the fuel curve based on the wideband O2 sensor input to match the user’s desired AFR value. The fuel trimming mode allows a user to make instant changes to the duration of time the fuel injectors are fired. The AFR+ features a push button interface on the gauge allowing for quick fine tuning by the end user for each operation mode.

AFR GAUGE
The AFR gauge provides the user an analog view of air/fuel ratio values between 10 and 16. The AFR gauge is the standard size of 2-1/16 inches in diameter to allow for multiple 3rd party mounting systems to be used. A self-adjusting back lighting display allows the AFR values to clearly be visible for both daytime and nightime riding.

WIDEBAND CONTROLLER – BOSCH CHIP and O2 SENSOR
The wide-band controller for the AFR+ uses a Bosch micro-controller for interpreting the data from the wide-band Bosch O2 sensor. The AFR+ uses the Bosch O2 sensor part number 17018 and can be found at most local NAPA stores.

View Complete Information at www.AFRplus.com

AFR+ KIT CONTENTS:

DP AFR Gauge – View All Styles

Bosch LSU 4.2 O2 Sensor #17018 – View Picture

DP Dash Mounting Hardware – View Picture

DP Wideband – 2CHST GHERL

DP Battery 44 in Sub-Harness

DP Flat O2 bung – View Picture

Production Code: ADJUSTABLE AFR CODE